[3s-a-charm]

Hello, I'm wondering if anyone knows what other BMW wheels are the same offset and bolt pattern as the 2016 X1? Because this vehicle is fairly new there aren't a lot of used wheels available but if the previous gen X1 or the current X3 have the same wheels then I may be able to pick up a winter set used. Thank you.

[Vogit]

Originally Posted by 3s-a-charm

Hello, I'm wondering if anyone knows what other BMW wheels are the same offset and bolt pattern as the 2016 X1? Because this vehicle is fairly new there aren't a lot of used wheels available but if the previous gen X1 or the current X3 have the same wheels then I may be able to pick up a winter set used. Thank you.

Only the 2 Series Active & Grand Tourer, I'm afraid - different bolt pattern & centre diameter. Some Mini wheels might fit.

[simon.]

Originally Posted by Vogit

Only the 2 Series Active & Grand Tourer, I'm afraid - different bolt pattern & centre diameter. Some Mini wheels might fit.

Oh balls. Have a set of winters on 18's from my F31 that I was hoping to use

[bmwnorge]

F31 should have 72.56mm center bore. F48 uses 66.6mm bore. go to a tire shop and ask for hub rings so you can use the F31 rims.

offset might be different but you can ask the tire/wheel shop for info and please report back.

i'm in the market for replica rims for my new F48 as well!

[serge2609]

I own the 2 series active tourer (F45) now and i ordered the X1.

So I hoped my winterwheels (589) could fit the X1. Sadly it doesn't because the centerbore is a bit smaller. I will have to look for a new set of winterwheels.

[simon.]

Originally Posted by bmwnorge

F31 should have 72.56mm center bore. F48 uses 66.6mm bore. go to a tire shop and ask for hub rings so you can use the F31 rims.

offset might be different but you can ask the tire/wheel shop for info and please report back.

i'm in the market for replica rims for my new F48 as well!

Cheers. I'll do some research

Serge. Did you read the above post? Spigot rings might well sort it so they fit.

[serge2609]

Originally Posted by simon.

Cheers. I'll do some research

Serge. Did you read the above post? Spigot rings might well sort it so they fit.

The wheels of my F45 has a smaller center than of the F48. So spigot rings do not work. If I want to fit my current winterwheels I will have to make the holes bigger to fit the F48..

[3s-a-charm]

Thanks for the info. Would be nice to hear if anyone successfully uses wheel from another BMW on their X1 and posts what spacers or hub-centric rings they used to make it work.

[simon.]

Originally Posted by 3s-a-charm

Thanks for the info. Would be nice to hear if anyone successfully uses wheel from another BMW on their X1 and posts what spacers or hub-centric rings they used to make it work.

Will look @ mine when the car comes (September) & post up how I get on.

[ttimbo]

Originally Posted by 3s-a-charm

Thanks for the info. Would be nice to hear if anyone successfully uses wheel from another BMW on their X1 and posts what spacers or hub-centric rings they used to make it work.

I guess if you're prepared to go to spacers and hub adapters, you can make quite a variety "fit". But there's an inherent problem due to the centre bore and PCD of the F48, which is different to other BMWs except the 2 series Active Tourer (and maybe the MINI)...VW/Audi might be a better source...