HELP! Spacers?

damonp335i · 04-17-2016, 11:19 AM

What's up guys. I am looking to run some spacers to poke the wheels out a little bit but I can't decide which to go with. I've included a few pics.. I'm thinking 12 on both the front and rear but opinions would be helpful. Thanks again!

JERZ-E90 · 04-17-2016, 11:23 AM

Do 15 all around

damonp335i · 04-17-2016, 11:25 AM

Quote:

Originally Posted by Itszshellz

Do 15 all around

I'm just worried about 15 because it's slammed in the front and I don't want it to rub.. but when I put my hand under there it seems like there is a lot of room

Cdutch513 · 04-17-2016, 03:28 PM

I did 12 on the front and 15 on the rear. Front looks good, wish I would've gone wider on rear.

obardain · 04-18-2016, 08:06 PM

12 front
15 rear
and I wish I would have gone wider in the rear also

martinblair · 04-18-2016, 08:18 PM

I've got 12 front, 20 rear and I think it's just right.

damonp335i · 04-18-2016, 08:19 PM

Quote:

Originally Posted by martinblair

I've got 12 front, 20 rear and I think it's just right.

can you post a pic real quick?

damonp335i · 04-18-2016, 08:20 PM

Quote:

Originally Posted by obardain

12 front
15 rear
and I wish I would have gone wider in the rear also

I'm running 17.5 inch wide rims in the front with 225s and 18.5s in the rear.. No idea what stocks are but just as a point of reference

Edit: 255s in the rear sorry forgot to mention that

martinblair · 04-18-2016, 08:22 PM

Unfortunately not til later this evening, but I will do so once I get home.

feuer · 04-18-2016, 09:19 PM

Quote:

Originally Posted by damonp335i

I'm running 17.5 inch wide rims in the front with 225s and 18.5s in the rear.

You most definetely do not as such rims do not exist.

Check and re post.

damonp335i · 04-18-2016, 09:20 PM

Quote:

Originally Posted by feuer

Quote:

Originally Posted by damonp335i

I'm running 17.5 inch wide rims in the front with 225s and 18.5s in the rear.

You most definetely do not as such rims do not exist.

Check and re post.

7.5 and 8.5 my bad

tmo24 · 04-19-2016, 12:16 AM

Quote:

Originally Posted by damonp335i

What's up guys. I am looking to run some spacers to poke the wheels out a little bit but I can't decide which to go with. I've included a few pics.. I'm thinking 12 on both the front and rear but opinions would be helpful. Thanks again!

What are your offsets and tire specs? I don't see how some people here are giving blind advice without knowing what you have to work with.

calicolorado · 04-19-2016, 12:44 AM

Quote:

Originally Posted by damonp335i

What's up guys. I am looking to run some spacers to poke the wheels out a little bit but I can't decide which to go with. I've included a few pics.. I'm thinking 12 on both the front and rear but opinions would be helpful. Thanks again!

Turner Motorsport 17.5mm hubcentric spacers in back are perfection with 18" Style 197 wheels. I'm running 255/35/18 Bridgestones on them. No issues whatsoever with rubbing.

damonp335i · 04-19-2016, 08:14 AM

Quote:

Originally Posted by tmo24

What are your offsets and tire specs? I don't see how some people here are giving blind advice without knowing what you have to work with.

I really wish I knew.. TBH i bought the car with these wheels and i've never known the exact specs on them. but they are 7.5 wide in the front with 225s and 8.5 in the back with 255s. Im just afraid of rubbing.. My friend put 15mm's on the rear of his 135i and it was rubbing horribly. It SEEMS as if I have a lot more room to work with on my 335i but its also lowered so its tough to tell what they are gonna do (especially on the front)

Quote:

Originally Posted by calicolorado

Turner Motorsport 17.5mm hubcentric spacers in back are perfection with 18" Style 197 wheels. I'm running 255/35/18 Bridgestones on them. No issues whatsoever with rubbing.

NICE! can you please post a pic?

Fred_Boosted · 04-19-2016, 09:41 AM

I am running 12mm all around, looks very good to me.

19x8.5 with 255 tire at rear, I can see alittle more rock hit marks on the rear quarter panel.

larrysing · 04-20-2016, 10:15 AM

On my 2011 335d M Sport, I installed 12mm front and 15mm rear. Immediately started getting fender rubbing. Had fenders rolled. Rubbing REDUCED but not eliminated. Wider stance throws more dirt onto the car in the front and on the back bumper.

I'm taking them off and selling them. Not worth the hassle to me.

damonp335i · 06-06-2016, 03:40 PM

Pics please!

Olagüe · 06-11-2016, 10:13 AM

My e92 FRONT & REAR 12mm

damonp335i · 06-27-2016, 01:36 PM

Quote:

Originally Posted by chris@strutmonkey

What size spacers you need depends on the offset of the wheels. Without this info, nobody can give you the right answer.

Thanks. I don't know the offset as these rims came with the car when I bought it.. I believe the offset is conveniently stamped on the inner part of the rim, though. I will post that information up as soon as I get back home where the car is.

damonp335i · 06-27-2016, 03:43 PM

Quote:

Originally Posted by chris@strutmonkey

yes, offset should be on inside of rims - begins with "ET", e.g. ET35 = 35mm offset.

It doesn't have that written on the rim... I thought it did. Just 18x8.5 H2 for the backs and 18x17.5 H2 for the fronts

04-17-2016, 11:19 AM	#1
damonp335i Captain 75 Rep 731 Posts Drives: 2008 335i 6MT Join Date: Jul 2015 Location: Central Jersey iTrader: (8) Garage List 2008 BMW 335i [0.00]	HELP! Spacers? What's up guys. I am looking to run some spacers to poke the wheels out a little bit but I can't decide which to go with. I've included a few pics.. I'm thinking 12 on both the front and rear but opinions would be helpful. Thanks again! Attached Images __________________ 2008 335i Coupe / Alpine White / 6MT / Fully Built Motiv Closed-Deck Motor / Motiv ST Kit / XR 105/69S / Motiv Twin Disc / VRSF 7.5 FMIC / ActiveAutowerke Exhaust / EOS Intake Manifold w/ 1050cc injectors / TiaL BOV / External VTA PCV / Quaife LSD / DSS Axles / KW V3Coilovers
	Appreciate 0 Tweet Quote

04-17-2016, 11:23 AM	#2
JERZ-E90 Private 14 Rep 67 Posts Drives: 2009 328xi Join Date: Dec 2015 Location: Paki$tan, NJ iTrader: (0) Garage List 09 E90 [0.00]	Do 15 all around
	Appreciate 0 Quote

04-17-2016, 03:28 PM	#4
Cdutch513 Captain 163 Rep 699 Posts Drives: 2010 E90 BMW 328i Join Date: Jun 2013 Location: Oak Harbor, WA iTrader: (0) Garage List 2010 BMW 328I [0.00]	I did 12 on the front and 15 on the rear. Front looks good, wish I would've gone wider on rear. __________________ Murdered 2010 E90 328i ESS VT1+ \| BMW PE \| 3IM \| K Sport Kontrol Pro
	Appreciate 0 Quote

04-18-2016, 08:06 PM	#5
obardain Enlisted Member 35 Rep 36 Posts Drives: 2015 M4 AY Join Date: Apr 2014 Location: St Louis iTrader: (0)	12 front 15 rear and I wish I would have gone wider in the rear also
	Appreciate 0 Quote

04-18-2016, 08:18 PM	#6
martinblair Private First Class 31 Rep 138 Posts Drives: 2010 328i Touring Join Date: Jan 2015 Location: Edmonton, AB iTrader: (0) Garage List 2010 328i xDrive To ... [0.00]	I've got 12 front, 20 rear and I think it's just right.
	Appreciate 0 Quote

04-18-2016, 08:22 PM	#9
martinblair Private First Class 31 Rep 138 Posts Drives: 2010 328i Touring Join Date: Jan 2015 Location: Edmonton, AB iTrader: (0) Garage List 2010 328i xDrive To ... [0.00]	Unfortunately not til later this evening, but I will do so once I get home.
	Appreciate 0 Quote

04-19-2016, 09:41 AM	#15
Fred_Boosted Captain 90 Rep 632 Posts Drives: 335i Join Date: Nov 2011 Location: USA iTrader: (1) Garage List 2010 BMW 335i [8.00]	I am running 12mm all around, looks very good to me. 19x8.5 with 255 tire at rear, I can see alittle more rock hit marks on the rear quarter panel.
	Appreciate 0 Quote

04-20-2016, 10:15 AM	#16
larrysing First Lieutenant 95 Rep 308 Posts Drives: 2011 335d M-Sport, Nav/Blinds Join Date: Feb 2016 Location: Arlington, TX iTrader: (0) Garage List 2011 BMW 335d [0.00]	On my 2011 335d M Sport, I installed 12mm front and 15mm rear. Immediately started getting fender rubbing. Had fenders rolled. Rubbing REDUCED but not eliminated. Wider stance throws more dirt onto the car in the front and on the back bumper. I'm taking them off and selling them. Not worth the hassle to me.
	Appreciate 0 Quote

06-06-2016, 03:40 PM	#17
damonp335i Captain 75 Rep 731 Posts Drives: 2008 335i 6MT Join Date: Jul 2015 Location: Central Jersey iTrader: (8) Garage List 2008 BMW 335i [0.00]	Pics please! __________________ 2008 335i Coupe / Alpine White / 6MT / Fully Built Motiv Closed-Deck Motor / Motiv ST Kit / XR 105/69S / Motiv Twin Disc / VRSF 7.5 FMIC / ActiveAutowerke Exhaust / EOS Intake Manifold w/ 1050cc injectors / TiaL BOV / External VTA PCV / Quaife LSD / DSS Axles / KW V3Coilovers
	Appreciate 0 Quote

06-11-2016, 10:13 AM	#18
Olagüe Brigadier General 106 Rep 4,502 Posts Drives: 333i e92 Join Date: Aug 2007 Location: New York City iTrader: (0)	My e92 FRONT & REAR 12mm
	Appreciate 0 Quote