01-22-2023, 06:58 AM | #1 |
New Member
2
Rep 14
Posts |
Esys coding help
Hi Guys, recently got F20 118i 2018. Purchased ENEt cable from ali-express and guy gave me version E-sys 3.25 and psdz 50.3.
I am getting error while reading SVT Bootloader btld_00002b41-007_000_000 not found in BaseVariantMapper [782] and Base variant not determinable. Check diagnostic address. [G175] while FSC read. Also, all ECU are not shown while read ECU such as Headunit. Any help please |
02-17-2023, 07:32 AM | #2 |
New Member
2
Rep 14
Posts |
|
Appreciate
0
|
03-16-2023, 09:44 AM | #3 |
New Member
2
Rep 25
Posts |
Hello friends, does anyone know how to make the Angel Eyes Brightness to 100% on the E-sys? I'm trying the codes below in the FEM_BODY module but without success, the Angels keep getting weak when turning on the lighthouse
Increase Angel Eyes Brightness to 100% 3062 - MAPPING_STANDL_V_L_PWM_LEVEL_1 set to: 100% or 64 3062 - MAPPING_STANDL_V_R_PWM_LEVEL_1 set to: 100% or 64 3062 - MAPPING_PARKL_V_L_PWM_1_LEFT set to: 100% or 64 3062 - MAPPING_PARKL_V_L_PWM_2_RIGHT set to: 100% or 64 Another coding that didn't work was "Tilt Passenger Mirror farther down when in reverse", I used the coding below but without success 3110 - ASP_BORDSTEINAUTOMATIK_DELTA set to: wert=4B |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|