BMW 1-Series Forum (F20) 135i - 1Addicts.com > Second Generation 1 Series Forum > 2012 BMW 1-Series Sporthatch (F20) Discussion > BMW F20 116i Remap Dyno/RR Help!
Post Reply
 
Thread Tools Search this Thread
      11-14-2017, 10:10 PM   #1
MNJF20
New Member
5
Rep
7
Posts

Drives: BMW F20 116i
Join Date: Jul 2015
Location: London

iTrader: (0)

BMW F20 116i Remap Dyno/RR Help!

Hi everyone,

I got my car remapped around a week ago and tbh I'm not entirely happy with the performance as I had expected a big difference. Yes it's more driveable and there is a slight pull from around 2500rpm, the car feels a little faster but it doesn't feel like my 116i is giving to it's full potential. It's also drinking a LOT of fuel from 2500rpm onwards.

Mods: 2 1/4" pipe exhaust, Mid silencer removed, SuperSprint Backbox (125i twin tailpipe look), GFB+ Diverter Valve, Pipercross Performance Air Filter. Car has had a full service recently too.

I'd like some advice on the hp gains and torque loss from the dyno run (link below). It looks wrong, before torque was almost constant from 2300-4100rpm which seems okay. But the torque after remap just keeps going down.
-------------------------------------------------------------------
Standard
Hp: 148.8hp @6391rpm
Torque: 196.8ft-lb / 266.82Nm @2721rpm

After Remap
Hp: 216.4hp @5876rpm
Torque: 275.5ft-lb / 373.52Nm @2866rpm
--------------------------------------------------------------------
I'm planning on going back to them. Those that have already got their remaps and dyno's, share your experiences. If possible, upload too.

[/IMG]

Last edited by MNJF20; 11-15-2017 at 07:35 AM.. Reason: Photo not showing
Appreciate 0
      11-15-2017, 12:15 AM   #2
ovekvam
Brigadier General
Norway
266
Rep
3,290
Posts

Drives: 2021 Galvanic Gold i3S
Join Date: Jun 2012
Location: Bryne, Norway

iTrader: (0)

I can't see your attached picture.
Appreciate 0
      11-15-2017, 07:42 PM   #3
harkes
Colonel
harkes's Avatar
China
1072
Rep
2,351
Posts

Drives: M135i, E39 M5, NSX and AE86
Join Date: Apr 2014
Location: Xiamen, China

iTrader: (0)

So you are saying that you cannot really feel the 30% torque increase?!? I think what you need is a N55 on methanol
__________________
M135i 8AT PWG, MHD, Pure Stage2, WMI via Torqbyte CM5-LT, Custom tuned by PureBoost
(A Dane in China)
Appreciate 0
      05-15-2018, 09:52 AM   #4
L99ryc
New Member
United Kingdom
6
Rep
16
Posts

Drives: Modified BMW F20 116i
Join Date: May 2018
Location: Cheshire

iTrader: (0)

Quote:
Originally Posted by MNJF20 View Post
Hi everyone,

I got my car remapped around a week ago and tbh I'm not entirely happy with the performance as I had expected a big difference. Yes it's more driveable and there is a slight pull from around 2500rpm, the car feels a little faster but it doesn't feel like my 116i is giving to it's full potential. It's also drinking a LOT of fuel from 2500rpm onwards.

Mods: 2 1/4" pipe exhaust, Mid silencer removed, SuperSprint Backbox (125i twin tailpipe look), GFB+ Diverter Valve, Pipercross Performance Air Filter. Car has had a full service recently too.

I'd like some advice on the hp gains and torque loss from the dyno run (link below). It looks wrong, before torque was almost constant from 2300-4100rpm which seems okay. But the torque after remap just keeps going down.
-------------------------------------------------------------------
Standard
Hp: 148.8hp @6391rpm
Torque: 196.8ft-lb / 266.82Nm @2721rpm

After Remap
Hp: 216.4hp @5876rpm
Torque: 275.5ft-lb / 373.52Nm @2866rpm
--------------------------------------------------------------------
I'm planning on going back to them. Those that have already got their remaps and dyno's, share your experiences. If possible, upload too.

[/IMG]
This does not seam right at all...

especially with the supporting mods, my car transformed with just stage 1 no mods and now i have almost gone stage 2 with inter cooler, m135i spark-plugs and m135i ignition coils i cant wait to get it stage 2 tuned.

it sounds like maybe your running rich (from your fuel usage and no torque)

this could also be your spark plugs!!! but i very much doubt it due to your recent service unless they didn't replace/check them ??

either way i would suggest upgrading to some NGK or M135i spark plugs.

much better down the line.

another thing, have you checked for boost leaks?
Appreciate 0
Post Reply

Bookmarks

Tags
116i, dyno, f20, remap, tuning

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 10:54 AM.




1addicts
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST