[Aminoscash]

Hello,
Im a new owner of an F21 2012 and im wondering if there's a way to stop DRLS from dimming while turn signals are flashing? With bimmercode.
Thank you!

[No one]

So go to BimmerCode and see (check the options list).

You shouldn't do it actually: it's a nice, useful feature that makes your signal more visible.

[Aminoscash]

I know you're right ! But i wanted to see how it does look...
I think it's only possible in expert mode there's nothing about that option in normal mode

[No one]

Well, I am not sure I should tell you this, but you can use the parking/side lights. Just don't make them bright like DRLs at night!

[Aminoscash]

Haha! Don't worry about that!
Where can i find this in bimmercode ? Can you be more specific please be cause im really new in to this

[No one]

https://bimmercode.app/cars/f20/ (in the app: "Front Electronic Module"), "Angel Eyes", "Angel Eyes brightness parking lights".

[Aminoscash]

Thank you! I'll try this tomorrow

[Aminoscash]

It didn't work :/ it was already at 100% but still dim when turn signal is on

[No one]

My sidelights don't dim when the turn signal is on. I didn't bother to check the setting, but they are quite dimmer than the DRLs. Say, they are dim already. Why would they dim? Perhaps, you shouldn't touch the "expert" mode with a long pole.

[Aminoscash]

My problem is the front DRLS that dim while am doing my turn signals it's not cool at all, i know that BMW did this so that the turn signals are more visible to other drivers... i wanted to desactivate that feature so there will be no dimming at all what so ever

[Aminoscash]

Here's an exemple of what i have on my car, i dont want that, i just want that my DRLS stays 100% brightness

[TheNine90]

Do you have LED headlights with FLE module?

[Aminoscash]

I have non adaptative xenon headlight, i don't know if that anserw your question

[TheNine90]

It looks like its only possible with LED headlights. To disable that you need to have FLE module.

[Aminoscash]

Hello again Guys,

So i managed to find a coding to stop my DRLS dimming with turn signals on, for those who don't like this feature do this:
go to expert mode in FEM in bimmercode then look for :

MAPPING_TAGFAHRL_V_L_PWM_LEVEL_2 (for the left side)
Set the value at 64 wich is 100%
The default valure is 0C (12%)
Then you do the same thing for:
MAPPING_TAGFAHRL_V_R_PWM_LEVEL_2 (for the right side)

By the way Tagfahrlicht is day time running lights in german 😁