[Sha_do]

Hello, you are my last hope...

The ABS pump of my 118d was broken (faulty solenoid valve). So I bought a second hand pump on Ebay (BMW charged me 3000€ to do it).

My problem now is that I have to code the module (or virginize it, I have found so many different forums with so many different answers so I'm a bit lost) and I can't find how to do it, with which software, which cable?

I have Bimmercode on my phone but I don't think it can do that.
I can have ISTA+ V4.31.3 and E-SYS 3.27.1 + psdzdata 4.31.12. I also bought an ENET cable.

So, if anyone can help me... Please...

[No one]

I would guess this should be fine: https://f30.bimmerpost.com/forums/sh....php?t=1635332. Or take your question to the 2 Series (dedicated) forum which is much more populated and the car is actually the same, just different body.

[Sha_do]

I saw this post, but it's seems too easy... I will give it a try and hopefully come back here, just to say it works..
Thank you!

[Sha_do]

A bit late, but it works!
Thank you!