[surmeetsingh15]

Hi Guys, recently got F20 118i 2018. Purchased ENEt cable from ali-express and guy gave me version E-sys 3.25 and psdz 50.3.

I am getting error while reading SVT

Bootloader btld_00002b41-007_000_000 not found in BaseVariantMapper [782]

and

Base variant not determinable. Check diagnostic address. [G175] while FSC read.

Also, all ECU are not shown while read ECU such as Headunit. Any help please

[surmeetsingh15]

Originally Posted by bimmerware

What is it you're trying to do?

Just minor things like angel eyes and all. Don't worry Shawn sent me the better version and it was all fixed

[Jems32]

Hello friends, does anyone know how to make the Angel Eyes Brightness to 100% on the E-sys? I'm trying the codes below in the FEM_BODY module but without success, the Angels keep getting weak when turning on the lighthouse

Increase Angel Eyes Brightness to 100%
3062 - MAPPING_STANDL_V_L_PWM_LEVEL_1 set to: 100% or 64
3062 - MAPPING_STANDL_V_R_PWM_LEVEL_1 set to: 100% or 64
3062 - MAPPING_PARKL_V_L_PWM_1_LEFT set to: 100% or 64
3062 - MAPPING_PARKL_V_L_PWM_2_RIGHT set to: 100% or 64

Another coding that didn't work was "Tilt Passenger Mirror farther down when in reverse", I used the coding below but without success

3110 - ASP_BORDSTEINAUTOMATIK_DELTA set to: wert=4B

[TheNine90]

For drl also do same for TAGFAHRL_V

Tilt mirror ASP_HORIZONTALE_MIN_POS => 5A