02-02-2024, 05:28 AM | #1 |
New Member
0
Rep 13
Posts |
F20 Hu Entry nav to NBT EVO, GPS no signal
Hi I have read all the treads I could manage to fix my problem but with no luck.
I have fitted the new NBT evo and installed maps with Fsc codes But the gps is over a 1000km from where I am and in the secret menu gps signal says restricted. I got the following info from Ista to help identify the issue: Status of registration of modem: Not defined Signal strength of mobile network: 0 Fault cause in the communication of the hypertext transfer protocol(HTTP). My Car has a TCB unit. I have tried all the coding options regarding the GPS and Telematic unit with no difference. |
02-02-2024, 05:32 AM | #2 |
New Member
0
Rep 13
Posts |
Only thing I can think of doing is I have to check the cables behind the HU and do some more testing in ISTA and see if I have contact with the TCB unit. I am a bit confused if I should have the GPS coded to use the TCB or have it not inactive, I have tried both with out any difference.
|
Appreciate
0
|
02-03-2024, 01:42 AM | #3 |
New Member
0
Rep 13
Posts |
So I was looking behind the head unit and it turns out it doesn't have a GPS plug which is strange because the car it came from had navigation. How do I make my navigation work with out a GPS do I Need the TCB module to be connected to the car to get GPS signal and connected drive?
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|