01-30-2024, 04:15 PM | #1 |
Registered
0
Rep 1
Posts |
M135i Abs light/driver stability/traction
Hi All,
Bought my first m135i and i’m having some problems with it. ABS light, traction light and driver stability warning is illuminated. Fault code was showing 480AA3 on a basic reader. Changed the driver side wheel speed sensor (£36 from gsf) and this did not rectify. Also changed the arm and front brake pads at this time. Then changed the wheel bearing. This again did not fix the issue. After changing the wheel bearing the engine management light has disappeared however the others remain. Has anyone experienced this or know what it could possibly be? I know the car needs tracking and the wheels are slightly low on air as the cars been sitting for a while (could this be an issue)?? Thanks |
01-30-2024, 10:26 PM | #2 |
Major
1082
Rep 1,410
Posts |
"Running On Empty"? Weird but numerous fault messages may result from an electrics failure like a rotten cable apart from the systems reported being faulty indeed. You need some diagnostics anyway. Pumping up the tyres won't help with those errors (you might need to reset the tyre pressure control though) but it's a good idea anyway.
|
Appreciate
1
m135i0.00 |
Post Reply |
Bookmarks |
|
|