[Randall]

[Kornmuse]

Bigger here :https://www.flickr.com/photos/sketsnl/14707761974/


Bigger here : https://www.flickr.com/photos/sketsnl/14709856912/


Bigger here : https://www.flickr.com/photos/sketsnl/14523490689/

GreG

[Bee Pee]

Upgraded my steering wheel to newer M sport type coupled with M series add-ons.

Sorry for cr@p iphone photo but you get the idea.....

[HAMDAN1000]

I'm about to change the front on mine with the m235i, this is what it looks like now will post pics when the conversion is done

[Mjlbakker]

Like!

[Hummy]

Love those seats @ HAMDAN1000!! Been wanting them forever, but quite pricey

[ovekvam]

This thread needs more orange.

[petay135]

[Lucas S.]

The estoril blue is dropped and maybe has spacers too?
The last white seems dropped too, is it?

[as7920]

Funny, the 2nd picture makes your wheels looks bigger. Guess that's the suspension drop?

[petay135]

Originally Posted by Lucas S.

The estoril blue is dropped and maybe has spacers too?
The last white seems dropped too, is it?

The blue and last white car are both on Eibach Pro Kit springs and run 13mm spacers front and 15mm rear with 25mm drop front and 15mm rear

[petay135]

Originally Posted by as7920

Funny, the 2nd picture makes your wheels looks bigger. Guess that's the suspension drop?

The cars were at slightly different angles causing the visual effect

[DECVING]

19" VMR VB3 Wheels added with Continental ContiForceContact 265 rear, 235 front tyres.

H & R Springs going in next week to lower it 25mm, also putting in an aFe cold air intake which will soon be followed by intercooler, charge pipe, dump pipe, full exhaust and then tune.

[Bee Pee]

Originally Posted by DECVING

19" VMR VB3 Wheels added with Continental ContiForceContact 265 rear, 235 front tyres.

H & R Springs going in next week to lower it 25mm, also putting in an aFe cold air intake which will soon be followed by intercooler, charge pipe, dump pipe, full exhaust and then tune.

Looks good.

What's the spec of your vb3's?

[DECVING]

Originally Posted by Pave Dew

Looks good.

What's the spec of your vb3's?

Front:

Rim size - 19” x 8.5”
P.C.D – 5 x 120
Offset – 40
Centrebore – 72.6

Rear:

Rim size – 19” x 9.5”
P.C.D – 5 x 120
Offset – 45
Centrebore – 72.6

[Bee Pee]

Originally Posted by DECVING

Front:

Rim size - 19” x 8.5”
P.C.D – 5 x 120
Offset – 40
Centrebore – 72.6

Rear:

Rim size – 19” x 9.5”
P.C.D – 5 x 120
Offset – 45
Centrebore – 72.6

Be interested to see photos post H&R springs install and read your comments about clearances to wheel arches with your combination of wheel offset/widths and slightly wider/taller tyres.

Here's my car with H&R springs installed to give you an idea of stance, albeit with stock wheels/tyres.

[chaddy74]

I agree !! Personally i dont think it will play ball !

Originally Posted by Pave Dew

Be interested to see photos post H&R springs install and read your comments about clearances to wheel arches with your combination of wheel offset/widths and slightly wider/taller tyres.

Here's my car with H&R springs installed to give you an idea of stance, albeit with stock wheels/tyres.

[DECVING]

We'll soon see. I've backed up one wheel onto a high kerb and let the other three wheel a stay in the road and it still had a fair bit of room. Other had done a similar combination so we will see.

[chaddy74]

Yeah - I just installed VMR V810 18" x 8.5 front and rear with a 45 offset and I too will be installing the H&R springs this wednesday with the 25mm drop ! Here are a few photo's of my setup pre the drop.

Originally Posted by DECVING

We'll soon see. I've backed up one wheel onto a high kerb and let the other three wheel a stay in the road and it still had a fair bit of room. Other had done a similar combination so we will see.

[DECVING]

What tyres you go?

[chaddy74]

http://www.falken.com.au/tyre-produc...zenis-fk453-2/

Originally Posted by DECVING

What tyres you go?

[Bee Pee]

Hello Decving and Chaddy,

I see you guys both have red calipers, do you both have MPBBK installed ?

If so, how is it over the standard blue caliper setup ?

Do you know if there was any coding to be done during the install to recalibrate ABS etc ?

Decving - which 19" conti's did you go for and how are you finding them compared to Mich PSS ?

Thanks,

PD