|
Slope was -2.2 in 100-200. So, my boost is too high if yours was 1.37. You know we can use mass blocks in vcds for getting logs. VCDS shows 1.45bar peak and 1.10end. But with elm327 and dash command app, peak is 1.49 and ending is 1.112bar. I think elm327 and applications are not accurate. When i decat my car, i will flash the stage 2 software and tune it to 1.55bar, maybe a little timing setting. m135i spark plugs and ignition coils are also in my list for stage 2. Im also curious about the peak boost driving at sea level.
|