Quote:
Originally Posted by fury13
Hey, so i connected the 10" screen up yesterday to test and see how it'll fit.
Unfortunately it came up with No Signal on the display and wouldn't display the iDrive screen.
Connected the 8" screen back and everything worked OK.
The good news is it doesn't look like very much is required to make it fit.
Any suggestions on why i'd be getting No Signal?
|
Yes that is normal because you need to configure the headunit for the new screen, so I don't know if there is another way but according with my experience you need to code it. So you need the cable to connect the laptop to your car and software, then code with some tutorial you will be able to do it.
This is for an NBT unit
CID_APIX_MODE -> apix2
CID_COLOR_DEPTH -> 24
CID_COM_MODE -> mii
CID_RESOLUTION -> 1280 x 480
Found from another post:
https://f30.bimmerpost.com/forums/sh....php?t=1402639