Quote:
|
Originally Posted by aiya78
I applied gummi, Wurth silicone spray, and wurth hhs2000.
But everything is not working well!
Anything else?
Really desperate!
|
Don't use silicone products or wax.
The painted surface the seals rub against needs to be clean with no lubricant.
Think of a that washing up advert when the plate squeaks when you rub your finger down it.
The plate squeaks because the surface has lubrication (water) to slide over, but so clean that your finger snags and jumps on the surface.
You need the seals to snag on the painted surface, any movement in the shut lines are absorbed by the hollow seals changing shape because they are snagged to the painted surface, without the snagging the seals slide over the surface creating the squeaks.