Couldn't find much showing me how to remove the A pillars on my F20 so here it is.
Held in in three places A, B ,C
- Pull out the door rubber from around the trim piece
- Pull top of A pillar towards the opposite side of the car.
The top of the A pillar will pop out about 1/2 inch. This frees up the plastic locator plug at A but does not get the metal plug at A out, nor B nor C
- In line with the A pillar, pull trim up away from the dash.
The metal plug at A should slide up ~1 inch then come free.
The white plugs at B and C should come out of the trim piece and stay in the frame.
Refitting is just removing the white plugs B,C from the frame and putting them into the trim.
- In line with A pillar, slide downwards into position so that the feet at the base of the trim locate into the dash.
- Check plugs ABC are lined up
- Bash it into place
- Refit door rubber