BMW 1-Series Forum (F20) 135i - 1Addicts.com > Second Generation 1 Series Forum > 2012 BMW 1-Series Sporthatch (F20) Discussion > Topview Sideview Camera on F20
Post Reply
 
Thread Tools Search this Thread
      11-11-2016, 11:58 PM   #1
Raygbmw1
New Member
Australia
5
Rep
23
Posts

Drives: Bmw116 F20
Join Date: Aug 2014
Location: Sydney, Australia

iTrader: (0)

Topview Sideview Camera on F20

Anybody knows what to FDL code for the 5DL (Topview/Sideview). I believe that this can be done for F20 even when the FA does not accept/include the option 5DL.

My reason for thinking this was I have a set of topview and sideview cameras and cables, trsvc module and switch ready for the coming BMW car my wife bought. I had nothing to do last week and decided to connect the cameras and module and switch to my 116i with a reverse camera, just to check if the module will work. I just want to know if it will work.

After connecting everything I without coding I turn the engine on and put it in reverse. The reverse camera worked perfectly for a second and then an error comes up saying REAR CAMERA FAILED but I got image on the screen. It’s ok as this is readily fixed by reinitializing the camera and module using Rheingold. I then press the sideview switch and I did get an image in the screen but again with error on the Dash 'SIDE VIEW CAMERA FAILED'. Like the reverse camera I thought I will just need to reinitialize the camera and it should be ok.

I connected ESYS to check if I can add 5DL and as expected it gave me an error that said something like FA does not have the provision for this option. I did not continue with this but I thought I installed a new switch for the DCS, Camera, Parking, etc I need to VO code the FEM, REM, ICM and HU, so I went ahead and did this. At this point I thought, I will inject the CAF to the TRSVC ECU.

I was surprise that now the side view cameras will not turn on when I press the Camera switch when before I VO coded the modules and injecting the CAF file it was working. VO coding did its job and configured the equipment as required for F20.

I connected the Rheingold and check the TRSVC module and camera if it is working properly which Rheingold confirm they are working and all installed and initialized.

What I noticed is now the ICM has an error that there is a signal not being received in the Flex ray. This is interesting. Before when I pressed the camera switch it was working and I’m getting an image on the screen.

Ray

Last edited by Raygbmw1; 11-12-2016 at 12:03 AM.. Reason: General editing
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 06:28 AM.




1addicts
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST