06-27-2017, 03:22 PM | #1 |
Registered
0
Rep 1
Posts |
Fitting a 4 pipe exhaust and a diffuser on a 114i
Hi guys.
Does anybody have experience with putting a 4 pipe exhaust on a 114i/116i/118i with an msport kit? I have a 2013 114i with the msport kit and currently only one tiny exhaust pipe. I would like two dual pipes and a diffuser. The problem is as follows: An ordinary f20 has the pipe in the center of the panel on the left side of the number plate. Here is a two pipe specimen. A m135i has pipes further towards the middle. Any diffuser I can find made for 4 pipes have the hole somewhere between the hole on a 114i and a m135i. It looks like 4 pipe exhausts are made to extend the holes both ways. Just like this m135i. Here is a picture of the diffuser on a 114i. As you can see a dual exhaust on each side will not fit the holes. Unless some manufacturer makes a version where the two pipes on each side are not centered around the original pipe. I havn't been able to find one. Has anybody here done this before? Will I really need to chose if I want the 4 pipes or the diffuser? |
Post Reply |
Bookmarks |
|
|