BMW 1-Series Forum (F20) 135i - 1Addicts.com > Second Generation 1 Series Forum > 2012 BMW 1-Series Sporthatch (F20) Discussion > M Performance tips on stock M135i exhaust
Post Reply
 
Thread Tools Search this Thread
      02-25-2015, 04:02 AM   #1
BWT
Private
7
Rep
94
Posts

Drives: M3
Join Date: Aug 2011
Location: Sydney

iTrader: (1)

M Performance tips on stock M135i exhaust

Will the M Performance exhaust tip fit onto the stock M135i exhaust? Also, any info on how to attach it would be appreciated.

I am happy with the sound of the stock exhaust but just want slightly larger tips.

Thanks in advance.
Appreciate 0
      02-25-2015, 03:36 PM   #2
Bee Pee
Brigadier General
United Kingdom
1736
Rep
4,496
Posts

Drives: AW M2 DCT
Join Date: Jun 2010
Location: SW London

iTrader: (3)

Standard tailpipes diameter is 60mm and MPE is 67mm.

MPE tips slide on and are secured by a grub screw at the 6 o clock position.

To fit them onto smaller tailpipes you need a 3mm thk packer sleeve with a wide split along its length. Slide sleeve over tailpipe and position slot pointing downwards. Slide on MPE trim so sleeve keeps it concentric and tighten grub screw to secure.
Appreciate 0
      02-27-2015, 04:54 PM   #3
BWT
Private
7
Rep
94
Posts

Drives: M3
Join Date: Aug 2011
Location: Sydney

iTrader: (1)

Quote:
Originally Posted by Bee Pee
Standard tailpipes diameter is 60mm and MPE is 67mm.

MPE tips slide on and are secured by a grub screw at the 6 o clock position.

To fit them onto smaller tailpipes you need a 3mm thk packer sleeve with a wide split along its length. Slide sleeve over tailpipe and position slot pointing downwards. Slide on MPE trim so sleeve keeps it concentric and tighten grub screw to secure.
Thanks for your response.
Do you know how to remove the original tip from the OEM exhaust?
Appreciate 0
      02-27-2015, 05:40 PM   #4
Bee Pee
Brigadier General
United Kingdom
1736
Rep
4,496
Posts

Drives: AW M2 DCT
Join Date: Jun 2010
Location: SW London

iTrader: (3)

Oem tips are held in place using friction. Use a block of wood and a mallet to knock them off the exhaust pipes
Appreciate 0
      02-27-2015, 07:09 PM   #5
BWT
Private
7
Rep
94
Posts

Drives: M3
Join Date: Aug 2011
Location: Sydney

iTrader: (1)

Quote:
Originally Posted by Bee Pee
Oem tips are held in place using friction. Use a block of wood and a mallet to knock them off the exhaust pipes
Thanks :
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 08:37 AM.




1addicts
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST