Quote:
Originally Posted by Almaretto
You can flash with ENET as well. Plus, not ideal, but you can jump car to another as power source.
|
About that jump car to another as power source thing, I thought of it too. Thanks.
I have been trying to see if I can code or flash the ICM on the bench before I put it in car. I have a ZGW04 (from a F25) and previously I could flash my NBT using this ZGW on the bench. But I couldn't connect the ICM-plus to this ZGW using Flexray. Tool32 and ISTAP refused to let me initialise Flexray. I don't know if it was designed not to talk to ICM-plus from F20/F30, or it is expecting all other nodes like VDC, DME, DSC to present in the Flexray group in order to do initialisation.
I tried the following pin assignments for the Flexray connection:
ZGW-pin 16 to ICM-pin 4
ZGW-pin 34 to ICM-pin 3
and
ZGW-pin 33 to ICM-pin 4
ZGW-pin 34 to ICM-pin 3
and
ZGW-pin 17 to ICM-pin 4
ZGW-pin 35 to ICM-pin 3
all faled; Tool32 reported Flexray timeout and ISTA reported ICM not found.